The Scion FR-S & Subaru BRZ for the Revolution RS offers aggressive looks, yet has controlled deep exhaust tone. It features full 3” diameter piping for superior performance. The purposeful single-sided cat-back layout exits the left side of the vehicle and produces an effective but lightweight system. The extra large GReddy resonator controls the unwanted drone.  Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

SOUND CLIP

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accommodate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ. 

Chassis:   ZN6
Engine:   4U-GSE (FA20)
Type:   Cat-back system
( large diameter single muffler system)

Note: * not compatiable with 2017 models

Number of pieces:  2pcs
Piping:   76 mm (3.0")
Tip:    115mm (4.5") x L 150 (5.9")
Gasket(s):    3.0" oval (qty: 1 included) replacement
Resonator:   yes

Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.

Weight:  21.5 lbs   (Stock weight  39 lbs)
Sound level:  107* dB(a) 

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #:10118102
Price: $700.00

An aggressive but controlled exhaust system for the Scion FR-S & Subaru BRZ is the Revolution RS. It features full 3” diameter piping for superior performance. Perfect for vehicles with forced-induction, like turbos, but it also includes a large mid-pipe resonator to help remove unwanted drone from the passanger compartment. The purposeful single-sided cat-back layout exits the right side of the vehicle and produces an effective but light-weight system. Like all GReddy Revolution RS systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty. also 2017-on Subaru BRZ

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accommodate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ.

Chassis:  ZN6 Kouki (minor change)
Engine:  FA20
Type:   Cat-back system

Number of pieces: 
Piping:    76 mm ( 3.0 in.)
Tip:   115 mm (4.5 ") x L185mm  (7.2")
Gasket(s):    3.0 " oval (qty: 1 included) replacement
Resonator:   Yes
Optional Silencer Available: yes

Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.

Weight:  23.1 lbs   (Stock weight  37.6 lbs)
Sound level:  102 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #:10118107
Price: $700.00

The Revolution RS for the Lexus IS300 unleashes great power gains, with excellent sound properties, through a high-performance cat-back layout. Sound levels at idle and cruising are surprisingly low, while at WOT (wide open throttle) the inline 6-cylinder sound of the IS300 is dramatically enhanced. The large 3” diameter also makes it ideal for additional upgrades and/or boosts. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:   SXE10
Engine:   2JZ-GE 
Type:   Cat-back system

notes:  * not compatible with wagon model

Number of pieces:  2pcs
Piping:   76 mm (3.0")
Tip:   115 mm (4.5") x L 120mm (4.7")
Gasket(s):    3.0" oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  30.6 lbs  
Sound level:  83 dB(a)

HP:  +10  hp
TRQ:  +15  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #:10118100
Price: $725.00

The Revolution RS for the Nissan 370Z is a light-weight Y-back exhaust with large diameter piping and an aggressive growl. The system includes a high flow Y-pipe that connects both engine banks through dual 2.5” (63.5mm) piping that merge smoothly into 3” (76mm) piping and a large resonator on the mid-pipe. The system exits an extra long, high-flow, RS muffler on the driver-side to manage sound output and avoid having to relocate the EVAP system. Dyno test have shown 11whp / 16ft-lbs gain on a normally-aspirated VQ37HR engine. Even with the large diameter piping, there is a 50% weight savings over the OEM stock system. Like all GReddy Revolution RS systems, it is a fully hand-welded 304 Stainless-Steel exhaust, that carries a Limited Lifetime Warranty.

SOUND CLIP

Note: the included tip is not compatible with Nismo bumpers, Optional extended tips sold separately.

Chassis:   Z34
Engine:   VQ37HR 
Type:   Cat-back exhaust with single-sided muffler (left exit)

Number of pieces:  3pcs
Piping:   2x 63.5mm (2.5") - 76mm (3.0")
Tip:   115 mm (4.5") x L 170mm (6.7")
Gasket(s):    3.0" oval (qty: 2 included) replacement
Resonator:   yes

Weight:  28.8 lbs   (Stock weight  57.2 lbs)
Sound level:  102 dB(a)

HP:  +11  hp
TRQ:  +16  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #:10128101
Price: $925.00

The Revolution RS for the Infiniti G37S has an aggressive growl while saving about half the weight over the stock system. The light-weight cat-back connects both engine banks through dual 2.5” (63.5mm) piping that merge smoothly into 3” (76mm) piping and a large resonator on the mid-pipe. The system exits an extra long, high-flow, RS muffler on the driver-side to manage sound output and avoid having to relocate the EVAP system. Dyno test have shown 11whp / 16ft-lbs gain on a normally-aspirated VQ37HR engine. Like all GReddy Revolution RS systems, it is a fully hand-welded 304 Stainless-Steel exhaust, that carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:   CPV36
Engine:   VQ37HR
Type:   Cat-back exhaust with single sided muffler

Number of pieces:  3pcs
Piping:   2x 63.5mm (2.5") - 76mm (3.0")
Tip:   115 mm (4.5") x L 150mm (5.9")
Gasket(s):    3.0" oval (qty: 2 included) replacement
Resonator:   yes

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound level:  TBA dB(a)

HP:  +11  hp
TRQ:  +16  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #:10128103
Price: $925.00

The Revolution RS for the Mitsubishi Lancer GT is an aggressive looking, but mild sounding system. The large free-flow race axle-back provides excellent sound suppression for the 4B12 engine. It’s also our lightest system for the car. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:   JA32U
Engine:   4B12
Type:   axle-back system

Number of pieces:  1pc
Piping:   63.5mm (2.5")
Tip:   105mm (4.0") x L 120mm (4.7")  or non-removable (early model)
Gasket(s):    OEM  (qty: 0 included)
Resonator:   n/a

Weight:  9.5 lbs   (Stock weight  15.5 lbs)
Sound level:  92 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #:10138101Price:475.00

The Revolution RS for the Mitsubishi EvoX features full non-tapered 3” diameter piping. Perfect to be used with optional 3” downpipe. The lightweight single sided cat-back exhaust shaves over 20lbs off the car. The design still maintains good sound levels and quality with a large resonator and extra-long RS muffler. Classic GReddy styling positions the muffler and tip stylishly underneath the car while matching the profile body-lines perfectly. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:   CZ4A
Engine:   4B11T
Type:   single-sided cat-back system (R)

Number of pieces:  2
Piping:   76mm (3")
Tip:   115mm (4.5")  x L170mm (6.7")   or non-removable (early model)
Gasket(s):    3" oval (qty: 1 included) replacement
Resonator:   Yes

Notes: reuse factory gasket and bolts for the mid-pipe

Weight:  22.5 lbs   (-20.21lbs)
Sound level:  98 dB(a) @ 5250 RPM

Dyno Chart
HP:  +10.8 hp
TRQ:  +3  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #:10138103
Price:695.00

The Revolution RS for the Mitsubishi Evo VIII / IX features full non-tapered 3” diameter piping. Perfect to be used with optional 3” downpipe. The lightweight single sided cat-back exhaust uses a purposeful layout with minimal bends in the system. The design still maintains excellent sound levels and quality with a large resonator and extra-long RS muffler and tip. Classic GReddy styling positions the muffler and tip stylishly underneath the car while matching the profile body-lines perfectly. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

 SOUND CLIP

Chassis:   CT9A
Engine:   4G63T
Type:   cat-back system

Number of pieces:  2pcs
Piping:   76mm (3.0")
Tip:   115mm (4.5") x L 185mm (7.2")  or non-removable (early model)
Gasket(s):    3.0" oval (qty: 1 included) 
Resonator:   Yes

Note: to reuse the OEM 02 sensor harness bracket, slight trimming is required.

Weight: 25.3 lbs  (Stock weight  34.7 lbs)
Sound level:  82 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #:10138102
Price:740.00

The Revolution RS for the Honda S2000 features full 2.5” diameter piping for superior performance. The purposeful single-sided cat-back layout with minimal bends produces an effective but light-weight system. Careful attention to hanger locations makes it compatible with both AP1 and AP2 chassis. The extra large GReddy resonator controls unwanted drone, that is typically associated with larger diameter S2000 systems. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:  AP1 / AP2

Engine:  F20 / F22
Type:  Cat-back system

Number of pieces: 2pc
Piping:    63.5mm ( 2.5 in.)
Tip:   115mm (4.5")  x  L 150mm (5.9")
Gasket(s):    2.5" oval (qty: 1 included) replacement
Resonator:   Yes
Note:  160xL350mm Revolution RS muffler canister 

Weight:  TBA lbs   (Stock weight  52 lbs)
Sound level:  97dB(a)

HP:  +5.8hp
TRQ:  +4.9 ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #:10158100
Price: $725.00

The Revolution RS for the GDB Subaru WRX/STI  features a full non-tapered 76mm (3”) diameter piping. The focused layout of the cat-back exhaust uses minimal bends to produces a cost-effective, light-weight system that saves 8lbs over the stock system. Traditional GReddy RS styling positions a large resonator and the muffler and tip fashionably underneath the vehicle, while enhancing the profile body-lines perfectly. Dyno test have shown increase in 8hp and 6ft-lbs of torque on a completely stock vehicle, with the potential for additional gains with other aftermarket modifications and/or tuning. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:  GDB
Engine:  EJ20 / EJ25
Type:   Cat-back system

Number of pieces: 2pcs
Piping:    76 mm ( 3.0 in.)
Tip:   115 mm (4.5 ") x L 170mm (6.7")
Gasket(s):    3.0" oval (qty: 1 included) replacement
Resonator:   Yes
 

Weight:  24.2 lbs   (Stock weight  32.1 lbs)
Sound level:  102 dB(a) 

HP:  +8.33  hp
TRQ:  +6.38  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #:10168100
Price: $730.00

The Revolution RS for the Subaru WRX/STI sedan features full 3.0” diameter piping for superior performance. Dyno test have shown increase in 12hp and an amazing 32ft-lbs of torque. The purposeful single-sided cat-back layout with minimal bends produces a cost-effective, light-weight system. Classic GReddy styling positions the muffler and tip stylishly underneath the right side of the car while matching the profile body-lines perfectly. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

Chassis:  GV8
Engine:  EJ25
Type:   Single sided, cat-back exhaust system

Number of pieces: 2pcs
Piping:    76 mm ( 3.0 in.)
Tip:   115 mm (4.5 ") x L 150mm (5.9")
Gasket(s):    3.0 " oval (qty: 1 included) replacement
Resonator:   Yes
Optional Silencer Available: TBA

Weight:  25.3 lbs  
Sound level:  98 dB(a)

HP:  +12  hp
TRQ:  +31  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #:10168101
Price: $725.00

1x  Revolution RS 51mm Dai. Muffler Silencer for GReddy Revolution RS 115mm Tip

Maintain straight-through flow, with more muffler sound suppression.

*(also compatible with most (160mm dia.)
GPP RS-RACE & GPP RS-Ti mufflers)

Tip Cup Dia.:   114mm (4.48")
Silencer Pipe Dia.:   51mm (2.0")
Pipe Length:   300mm (11.8")
Material:   304 Stainless-steel
Mounting pattern:   Revolution RS Tri-mounting

*Available in Silencer Pipe Diameters 51mm or 43mm

Fits most GReddy Revolution RS, GPP RS-Race & GPP RS-Ti 3" / 160mm dia mufflers.
- Call to check compatibility with your application. (949) 588-8300

Also available in:
p/n 11001201 - 43mm silencer for 115mm RS Tip
p/n 11001202 - 51mm silencer for 105mm RS Tip
p/n 11001203 - 38mm silencer for 105mm RS Tip

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11001200
Price: $50.00

1x  Revolution RS 43mm Dai. Muffler Silencer for GReddy Revolution RS 115mm Tip

Maintain straight-through flow, with more muffler sound suppression.

*(also compatible with most (160mm dia.)
GPP RS-RACE & GPP RS-Ti mufflers)

Tip Cup Dia.:   114mm (4.48")
Silencer Pipe Dia.:   43mm (1.69")
Pipe Length:   300mm (11.8")
Material:   304 Stainless-steel
Mounting pattern:   Revolution RS Tri-mounting

*Available in Silencer Pipe Diameters 51mm or 43mm

Fits most GReddy Revolution RS, GPP RS-Race & GPP RS-Ti 3" / 160mm dia mufflers.
- Call to check compatibility with your application. (949) 588-8300

Also available in:
p/n 11001200 - 51mm silencer for 115mm RS Tip
p/n 11001202 - 51mm silencer for 105mm RS Tip
p/n 11001203 - 38mm silencer for 105mm RS Tip

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11001201
Price: $50.00

1x  Revolution RS 51mm Dai. Muffler Silencer for GReddy Revolution RS 105mm Tip

Maintain straight-through flow, with more muffler sound suppression.

*(also compatible with most (140mm dia.)
GPP RS-RACE & GPP RS-Ti mufflers)

Tip Cup Dia.:   102mm (4.48")
Silencer Pipe Dia.:   51mm (2.0")
Pipe Length:   300mm (11.8")
Material:   304 Stainless-steel
Mounting pattern:   Revolution RS Tri-mounting

*Available in Silencer Pipe Diameters 51mm or 38mm

Fits most GReddy Revolution RS, GPP RS-Race & GPP RS-Ti 2.5" / 140mm dia mufflers.
- Call to check compatibility with your application. (949) 588-8300

Also available in:
p/n 11001201 - 43mm silencer for 115mm RS Tip
p/n 11001200 - 51mm silencer for 115mm RS Tip
p/n 11001203 - 38mm silencer for 105mm RS Tip

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11001202
Price: $50.00

1x  Revolution RS 38mm Dai. Muffler Silencer for GReddy Revolution RS 105mm Tip

Maintain straight-through flow, with more muffler sound suppression.

*(also compatible with most (140mm dia.)
GPP RS-RACE & GPP RS-Ti mufflers)

Tip Cup Dia.:   102mm (4.48")
Silencer Pipe Dia.:   38mm (1.5")
Pipe Length:   300mm (11.8")
Material:   304 Stainless-steel
Mounting pattern:   Revolution RS Tri-mounting

*Available in Silencer Pipe Diameters 51mm or 38mm

Fits most GReddy Revolution RS, GPP RS-Race & GPP RS-Ti 2.5" / 140mm dia mufflers.
- Call to check compatibility with your application. (949) 588-8300

Also available in:
p/n 11001201 - 43mm silencer for 115mm RS Tip
p/n 11001200 - 51mm silencer for 115mm RS Tip
p/n 11001202 - 51mm silencer for 105mm RS Tip

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11001203
Price: $50.00

GReddy Universal Revolution RS Muffler and Tip sets create options for custom (single or dual muffler) applications as well as for vehicles not covered by the current line-up. Now with our Tri-bolt removable Tip, optional GReddy RS tips of different length, material and shape are also be purchased separately for more customization. Our signature high-quality, straight-through, universal racing sport mufflers offer exceptional flow with a clean, aggressive exhaust note. The compact 304 stainless-steel mufflers feature our improved internal construction with long lasting, high temperature-resistant sound suppression materials. For something special, revolutionize your car with a custom GReddy exhaust!

2.5" Dia. Universal Muffler and Tip set

 * Compatible with other 105mm RS (Stainless & Titanium) Tips and Silencers

Muffler Type: 140mm Round Revolution RS
    Type: Straight-through
    Inlet / Outlet : 63.5mm (2.5")
    Dia.: 140mm (5.5") 
    Length: 300mm (11.8")

Tip Type: Removable Single-wall Stainless-steel with GReddy Logo with Tri-bolt mounting
   Dia.: 105mm (4.1")
   Length:  120mm (4.7")

   Piping Extension: L38mm (1.5")
     - 2.5" piping at the back of the muffler

Notes:  
  requires welding (and cutting) for mounting and attaching piping

Material: 304 Stainless-steel

** Compatible with optional Revolution RS Tips and Silencers

   *** also see our RS-Ti Universal Muffler & Tip sets

*Because of the custom application, this Universal Revolution RS is NOT valid for the Limited Lifetime Warranty of the application specific Revolution RS systems.

Part #:11001126
Price: $200.00

GReddy Universal Revolution RS Muffler and Tip sets create options for custom (single or dual muffler) applications as well as for vehicles not covered by the current line-up. Now with our Tri-bolt removable Tip, optional GReddy RS tips of different length, material and shape are also be purchased separately for more customization. Our signature high-quality, straight-through, universal racing sport mufflers offer exceptional flow with a clean, aggressive exhaust note. The compact 304 stainless-steel mufflers feature our improved internal construction with long lasting, high temperature-resistant sound suppression materials. For something special, revolutionize your car with a custom GReddy exhaust!

3.0" Dia. Universal Muffler and Tip set

* Compatiable with other 115mm RS (Stainless & Titanium) Tips and Silencers

Muffler Type: 160mm Round Revolution RS
    Type: Straight-through
    Inlet / Outlet : 76mm (3")
    Dia.: 160mm (5.3") 
    Length: 300mm (11.8")

Tip Type: Removable Single-wall Stainless-steel with GReddy Logo with Tri-bolt mounting
   Dia.: 115mm (4.5")
   Length:  120mm (4.7")

   Piping Extension: L38mm (1.5")
     - 2.5" piping at the back of the muffler

Notes:  
  requires welding (and cutting) for mounting and attaching piping

Material: 304 Stainless-steel

** Compatible with optional Revolution RS Tips and Silencers

   *** also see our RS-Ti Universal Titainium Muffler & Tip Set

*Because of the custom application, this Universal Revolution RS is NOT valid for the Limited Lifetime Warranty of the application specific Revolution RS systems.

Part #:11001131
Price: $220.00

1x GReddy Ti Revolution RS Tip Dia. 115 x L120 for most 3" Revolution (160mm dia.) muffler systems

- Single-wall Burnt Titanium finish with etched GReddy Logo

*(also compatible with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 120mm (4.7")
Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional tip lengths) GReddy Revolution RS Ti Tip. Exclusively for GReddy Revolution RS and GPP RS Ti and GPP RS-RACE exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths available 120, 150, 170mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11002101
Price:$95.00

1x GReddy Ti Revolution RS Tip Dia.115 x L150 for most 3" Revolution (160mm dia.) muffler systems

- Single-wall Burnt Titanium finish with etched GReddy Logo

*(also compatible with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 150mm (5.9")
Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional tip lengths) GReddy Revolution RS Ti Tip. Exclusively for GReddy Revolution RS and GPP RS Ti and GPP RS-RACE exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths available 120, 150, 170mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11002102
Price:$95.00

1x GReddy Ti Revolution RS Tip Dia. 115 x L170 for most 3" Revolution (160mm dia.) muffler systems

- Single-wall Burnt Titanium finish with etched GReddy Logo

*(also compatible with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 170mm (6.7")
Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional tip lengths) GReddy Revolution RS Ti Tip. Exclusively for GReddy Revolution RS and GPP RS Ti and GPP RS-RACE exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths available 120, 150, 170mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11002103Price:$95.00

1x GReddy Ti Revolution RS Tip Dia. 115 x L170 for most 3" Revolution (160mm dia.) muffler systems

- Single-wall Burnt Titanium finish with etched GReddy Logo

*(also compatible with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 185mm (7.28")
Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional tip lengths) GReddy Revolution RS Ti Tip. Exclusively for GReddy Revolution RS and GPP RS Ti and GPP RS-RACE exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths available 120, 150, 170, 185mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11002104
Price:100.00

1x GReddy Ti Revolution RS Tip Dia. 105 x L120 for most 2.5" Revolution (140mm dia.) muffler systems

- Single-wall Burnt Titanium finish with etched GReddy Logo

*(also compatible with most (140mm dia.) GPP RS-RACE & GPP RS-Ti round and oval mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 105mm (4.1")
Length: 120mm (4.7")
Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional tip lengths) GReddy Revolution RS Ti Tip. Exclusively for GReddy Revolution RS and GPP RS Ti and GPP RS-RACE exhausts with 2.5" piping diameter and 140mm overall muffler diameter. 
(105mm Tip Lengths available 120, 150mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11002111
Price:$95.00

1x GReddy Ti Revolution RS Tip Dia. 105 x L150 for most 2.5" Revolution (140mm dia.) muffler systems

- Single-wall Burnt Titanium finish with etched GReddy Logo

*(also compatible with most (140mm dia.) GPP RS-RACE & GPP RS-Ti round and oval mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 105mm (4.1")
Length: 150mm (5.9")
Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional tip lengths) GReddy Revolution RS Ti Tip. Exclusively for GReddy Revolution RS and GPP RS Ti and GPP RS-RACE exhausts with 2.5" piping diameter and 140mm overall muffler diameter. 
(105mm Tip Lengths available 120, 150mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11002112
Price:$95.00

Please note: the 11001150 part number will soon be superceed by a new part number 11002121

Revolution RS Tip: for most 3" Revolution RS, RS-Race, or RS-Ti (160mm dia.) muffler systems
- Single-wall, 3 piece welded turndown, burnt Titanium Tip with etched GReddy logo at the top of the turndown tip.

Dia.: 115mm (4.5")
Lengths:
120mm (4.7") = straight 20mm / turndown 100mm

Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional burnt Titanium turndown tip (3 lengths) GReddy Revolution RS Ti 3 section turndown tip. Exclusively for GReddy Revolution RS, GPP RS-Race and RS-Ti exhausts with 115mm tip diameter.

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

- Also available in 105mm and 115mm SUS304 sizes, and 105mm Titanium Tips

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11001150
Price:$140.00

Please note: the 11001151 part number will soon be superceed by a new part number 11002122

Revolution RS Tip: for most 3" Revolution RS, RS-Race, or RS-Ti (160mm dia.) muffler systems
- Single-wall, 3 piece welded turndown, burnt Titanium Tip with etched GReddy logo at the top of the turndown tip.

Dia.: 115mm (4.5")
Lengths:
   150mm (5.9") = straight 50mm / turndown 100mm

Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional burnt Titanium turndown tip (3 lengths) GReddy Revolution RS Ti 3 section turndown tip. Exclusively for GReddy Revolution RS, GPP RS-Race and RS-Ti exhausts with 115mm tip diameter.

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

- Also available in 105mm and 115mm SUS304 sizes, and 105mm Titanium Tips

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11001151
Price:$150.00

Please note: the 11001152 part number will soon be superceed by a new part number 11002123

Revolution RS Tip: for most 3" Revolution RS, RS-Race, or RS-Ti (160mm dia.) muffler systems
- Single-wall, 3 piece welded turndown, burnt Titanium Tip with etched GReddy logo at the top of the turndown tip.

Dia.: 115mm (4.5")
Lengths:
    170mm (6.7") = straight 70mm / turndown 100mm

Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional burnt Titanium turndown tip (3 lengths) GReddy Revolution RS Ti 3 section turndown tip. Exclusively for GReddy Revolution RS, GPP RS-Race and RS-Ti exhausts with 115mm tip diameter.

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

- Also available in 105mm and 115mm SUS304 sizes, and 105mm Titanium Tips

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11001152
Price:$160.00

Revolution RS Tip: for most 2.5" Revolution RS, RS-Race, or RS-Ti

(140mm dia.) muffler systems
- Single-wall, 3 piece welded turndown, burnt Titanium Tip with etched GReddy logo at the top of the turndown tip.

Dia.: 105mm (4.1")
Lengths:
120mm (4.7") = straight 20mm / turndown 100mm

Material: Titanium
Mounting pattern: RS Tri-mounting

Optional burnt Titanium turndown tip (3 lengths) GReddy Revolution RS Ti 3-section turndown tip. Exclusively for GReddy Revolution RS, GPP RS-Race and RS-Ti exhausts with 105mm tip diameter.

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

- Also available in 105mm and 115mm SUS304 sizes, and 105mm Titanium Tips

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11002131
Price:130.00

Revolution RS Tip: for most 2.5" Revolution RS, RS-Race, or RS-Ti

(140mm dia.) muffler systems
- Single-wall, 3 piece welded turndown, burnt Titanium Tip with etched GReddy logo at the top of the turndown tip.

Dia.: 105mm (4.1")
Lengths:
150mm (5.9") = straight 50mm / turndown 100mm

Material: Titanium
Mounting pattern: RS Tri-mounting

Optional burnt Titanium turndown tip (3 lengths) GReddy Revolution RS Ti 3-section turndown tip. Exclusively for GReddy Revolution RS, GPP RS-Race and RS-Ti exhausts with 105mm tip diameter.

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

- Also available in 105mm and 115mm SUS304 sizes, and 105mm Titanium Tips

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11002132
Price:140.00

1x GReddy Revolution RS Tip Dia115 x L120 for most 3" Revolution (160mm dia.) muffler systems
- Single-wall 304 stainless steel with etched GReddy Logo

*(also compatible with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 120mm (4.7")
Material: 304 Stainless-steel
Mounting pattern: Revolution RS Tri-mounting

Replacement (& optional tip lengths) GReddy Revolution RS SUS304 Tip. Exclusively for GReddy Revolution RS exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths available 120, 150, 170mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11001140
Price:55.00

1x GReddy Revolution RS Tip Dia115 x L150 for most 3" Revolution (160mm dia.) muffler systems
- Single-wall 304 Stainless-steel with etched GReddy Logo

*(also compatiable with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 50mm (5.9")
Material: 304 Stainless-steel
Mounting pattern: Revolution RS Tri-mounting

Replacement (& optional tip lengths) GReddy Revolution RS SUS304 Tip. Exclusively for GReddy Revolution RS exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths aviable 120, 150, 170mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11001141
Price:55.00

1x GReddy Revolution RS Tip Dia115 x L170 for most 3" Revolution (160mm dia.) muffler systems
- Single-wall 304 Stainless-steel with etched GReddy Logo

*(also compatiable with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 170mm (6.69")
Material: 304 Stainless-steel
Mounting pattern: Revolution RS Tri-mounting

Replacement (& optional tip lengths) GReddy Revolution RS SUS304 Tip. Exclusively for GReddy Revolution RS exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths aviable 120, 150, 170mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11001142
Price:55.00

1x GReddy Revolution RS Tip Dia115 x L185 for most 3" Revolution (160mm dia.) muffler systems
- Single-wall 304 Stainless-steel with etched GReddy Logo

*(also compatiable with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 185mm (7.28")
Material: 304 Stainless-steel
Mounting pattern: Revolution RS Tri-mounting

115mm dia. x L185mm - GReddy logo - p/n 11001170
115mm dia. x L185mm - RS Race logo - p/n 1100158

Replacement (& optional tip lengths) GReddy Revolution RS SUS304 Tip. Exclusively for GReddy Revolution RS exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths aviable 120, 150, 170, 185mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11001158
Price:$45.00

1x GReddy Revolution RS Tip Dia.105 x L120 for most 2.5" Revolution (140mm dia.) muffler systems
- Single-wall 304 Stainless-steel with etched GReddy Logo

*(also compatiable with most (140mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 105mm (4.1")
Length: 120mm (4.7")
Material: 304 Stainless-steel
Mounting pattern: Revolution RS Tri-mounting

Replacement (& optional tip lengths) GReddy Revolution RS SUS304 Tip. Exclusively for GReddy Revolution RS ( GPP RS-RACE & RS-Ti) exhausts with 2.5" piping diameter and 140mm overall muffler diameter. 
(105mm Tip Lengths aviable 120, 150mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11001143
Price:55.00

1x GReddy Revolution RS Tip Dia.102 x L150 for most 2.5" Revolution (140mm dia.) muffler systems
- Single-wall 304 Stainless-steel with etched GReddy Logo

*(also compatiable with most (140mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 105mm (4.1")
Length: 150mm (5.9")
Material: 304 Stainless-steel
Mounting pattern: Revolution RS Tri-mounting

Replacement (& optional tip lengths) GReddy Revolution RS SUS304 Tip. Exclusively for GReddy Revolution RS ( GPP RS-RACE & RS-Ti) exhausts with 2.5" piping diameter and 140mm overall muffler diameter. 
(105mm Tip Lengths aviable 120, 150mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #:11001144
Price:55.00

GReddy Universal Revolution RS Muffler and Tip sets create options for custom (single or dual muffler) applications as well as for vehicles not covered by the current line-up. Our signature high-quality, straight-through, universal racing sport mufflers offer exceptional flow with a clean, aggressive exhaust note. The compact 304 stainless-steel mufflers feature our improved internal construction with long lasting, high temperature-resistant sound suppression materials.  For something special, revolutionize your car with a custom GReddy exhaust.
 

3.0" Dia. Universal Muffler and Tip set

Muffler Type: 160mm Round Revolution RS
    Type: Straight-through
    Inlet / Outlet : 76mm (3")
    Dia.: 160mm (5.3") 
    Length: 300mm (11.8")

Tip Type: Single-wall Stainless-steel with GReddy Logo non-removable
   Dia.: 115mm (4.5")
   Length:  120mm (4.7")

   Piping Extension: L38mm (1.5")
     - 2.5" piping at the back of the muffler

Notes:  
  requires welding (and cutting) for mounting and attaching piping

Material: 304 Stainless-steel

** Not compatible with optional Revolution RS Tips and Silencers

 *Because of the custom application, this Universal Revolution RS is NOT valid for the Limited Lifetime Warranty of the application specific Revolution RS systems.

Part #:11001130
Price:200.00

GReddy Universal Revolution RS Muffler and Tip sets create options for custom (single or dual muffler) applications as well as for vehicles not covered by the current line-up. Our signature high-quality, straight-through, universal racing sport mufflers offer exceptional flow with a clean, aggressive exhaust note. The compact 304 stainless-steel mufflers feature our improved internal construction with long lasting, high temperature-resistant sound suppression materials. For something special, revolutionize your car with a custom GReddy exhaust!
 

2.5" Dia. Universal Muffler and Tip set

Muffler Type: 140mm Round Revolution RS
    Type: Straight-through
    Inlet / Outlet : 63.5mm (2.5")
    Dia.: 140mm (5.5") 
    Length: 300mm (11.8")

Tip Type: Single-wall Stainless-steel with GReddy Logo non-removable
   Dia.: 103mm (4.0")
   Length:  120mm (4.7")

   Piping Extension: L38mm (1.5")
     - 2.5" piping at the back of the muffler

Notes:  
  requires welding (and cutting) for mounting and attaching piping

Material: 304 Stainless-steel

** Not compatible with optional Revolution RS Tips and Silencers

*Because of the custom application, this Universal Revolution RS is NOT valid for the Limited Lifetime Warranty of the application specific Revolution RS systems.

Part #:11001125
Price:180.00