Turbo Kits

Bolt-on Turbo kit for the Honda AP2 "Drive-by-Wire" S2000 with full preprogramed fuel management

2006-09 Honda S2000 (with drive by wire throttle type)

 * 50 State Street Legal Turbo Kit *  CARB Executive Order D-397-13
 

Fuel Management:  GPP Preprogramed Honda FlashPro, 550cc fuel injectors

Turbo:  Garrett GTX2867R Gen 2
Intercocoler:  GPP Type 28 inner-fin, Air to Air
Exhaust:  GPP Cast SUS Exhaust Manifold
                SUS Downpipe with adpater
Intake: GPP Inner-fin Air to Air Type-28 Intercooler
             Airinx M air filter and aluminum suction pipes
             Aluminum charge pipes, silicone hoses and clamps
Also includes: Air diversion plate, oil filter and necessary gaskets, brackets, hoses and hardware.

* Bolt-on kit base power increase  +60whp  +60ft/lbs

Tuner turbo kit for the Honda AP1, AP2, and AP2 "Drive-by-Wire" S2000

2000-09 Honda S2000
 

* Tuner Turbo Kit requires additional fuel management 
   -  (does not include a tuning solution or fuel injectors, like the bolt-on turbo kit p/n 11550051)

Turbo:  Garrett GTX2867R Gen 2
Intercocoler:  GPP Type 28 inner-fin, Air to Air
Exhaust:  GPP Cast SUS Exhaust Manifold
                SUS Downpipe with adpater
Intake:  Airinx M air filter and aluminum suction pipes
             Aluminum charge pipes, silicone hoses and clamps
Also includes: Air diversion plate, oil filter and necessary gaskets, brackets, hoses and hardware.

_{"For Competion Only" Kit - requires a (custom/aftermarket) fuel enrichment or fuel system solution}

^{* Check legality of aftermarket products with your local state, county, city authorities before purchasing.}

[DISCONTINUED for USA]

Winner of the 2018 Dsport Magazine's 86 (Forced Induction) Challenge - GPP GTX2867R-Gen2 Tuner Turbo Kit!

also fits Subaru BRZ / Toyota 86 

for (ZN6) 4U-GSE / (ZC6) FA20 (for stock and built engines)

   -- Typical low boost Dyno results: 278whp / 210ft-lbs @ 10.29psi
   -- Easily capable of boosting higher for even more power
        ^{(additional engine modifications may be necessary)}
   -- GTX2867R -Gen2 turbo is rated upto 550hp

      * NOTE:  Replacement, low profile radiator fans required for installation.
                    [2x SPAL Low Profile 9” fans SPAL Part#  30100392*]
                    Intercooler installation will also require removing the factory crash beam.  [Race option - "Street Fraction Bash Bar"]

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Includes: GARRETT GTX2867R GEN. II Turbocharger

GReddy Performance Products is proud to add the full line of Turbo by Garrett GTX-R turbochargers to our GReddy/Mitsubishi line-up. With more options to better match the ideal turbocharger(s) to each specific application, look for more aggressive turbo kits from the GPP Turbo Kit line.

The latest addition to our FR-S/86/BRZ Tuner Turbo Kits is our Version 3, GTX-R Tuner Turbo Kit for the 2012-2017 FR-S, 86 and BRZ. Designed around a powerful Garrett GTX-2867R Gen II (with a rated range of 275-550hp,) this updated kit features a larger, centered GReddy Type-24 intercooler and all the necessary hardware for a versatile tuner kit, that will be an ideal fit for both stock FR-S/86/BRZ engines, as well as fully strengthened FA20 engines.

(Installation Instructions)

Tuner Turbo Kit ( additional fuel management not included)

Advanced Garrett GTX 2867 R Gen.II actuator turbo (top-mounted)

4-1 SUS Exhaust Manifold with dual flex-pipes (header type)

Large SUS downpipe & front pipe (removes catlyic-conveters)

free-flow GPP open element air intake

aluminum intercooler piping (direct routing)

Large centered Type 24 Intercooler with end-tanks

includes necessary gaskets, heat shields, couplings, hose, mounting brackets, etc.

GReddy Dyno results: 278whp* / 210ft-lbs* @ 10psi
*(2016 Scion FR-S with GReddy exhaust and GReddy Tuned-EcuTek - NOT INCLUDED)
**dyno results may vary depending on conditions, additional components & tuning

*** Not compatiable with GReddy Circuit Spec Oil Cooler Kit for FR-S ( p/n 12014632 )

In many states, it is unlawful to tamper with your vehicle’s emissions equipment. GReddy / GPP (GReddy Performance Products, Inc.) products are designed and sold for sanctioned off-road/competition, non-emissions controlled vehicles only and may never be used on a public road or highway. Using GReddy/GPP products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website: www.semasan.com/emissions for state by state details in the USA.) It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any GReddy/GPP product.
Legal for sale or use in CA only on vehicles which may never be driven on a public highway.

GReddy FR-S Product Page

[DISCONTINUED for USA]

also fits Subaru BRZ / Toyota 86 

for (ZN6) 4U-GSE / (ZC6) FA20

(Installation Instructions)

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

See more info on our Blog

Tuner Turbo Kit ( additional fuel management not included)

GReddy T518Z -10cm2 actuator turbo (top-mounted)

4-1 SUS Exhaust Manifold with dual flex-pipes (header type)

Large SUS downpipe & front pipe (removes catlyic-conveters)

free-flow Airinx AY-SM air intake

aluminum intercooler piping (direct routing)

Type 40E Intercooler with end-tanks

includes necessary gaskets, heat shields, couplings, hose, mounting brackets, etc.

    * See the IMPORT TUNER mag article: 

GReddy Dyno results:  +93.5whp* / +68.7ft-lbs* @ 7psi
  *(2013 Scion FR-S with GReddy Evo3 exhaust and GReddy Tuned-EcuTek - NOT INCLUDED)
  **dyno results may vary depending on conditions, additional components & tuning

*** Compatiable with GReddy Circuit Spec Oil Cooler Kit for FR-S
     ( p/n 12014632 )

In many states, it is unlawful to tamper with your vehicle’s emissions equipment. GReddy / GPP (GReddy Performance Products, Inc.) products are designed and sold for sanctioned off-road/competition, non-emissions controlled vehicles only and may never be used on a public road or highway. Using GReddy/GPP products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website: www.semasan.com/emissions for state by state details in the USA.) It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any GReddy/GPP product.
Legal for sale or use in CA only on vehicles which may never be driven on a public highway

GReddy FR-S Product Page

[DISCONTINUED for USA]

also fits Subaru BRZ / Toyota 86 

for (ZN6) 4U-GSE / (ZC6) FA20 with low compression built motors only*
please use #11510094 T518Z or #11518000 GTX-R for stock engine applications

(Installation Instructions)

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

See more info on our Blog

Tuner Turbo Kit ( additional fuel management not included)

Larger GReddy T620Z -10cm2 actuator turbo (top-mounted)

4-1 SUS Exhaust Manifold with dual flex-pipes (header type)

Large SUS downpipe & front pipe (removes catlyic-conveters)

free-flow Airinx AY-SM air intake

aluminum intercooler piping (direct routing)

Type 40E Intercooler with end-tanks

includes necessary gaskets, heat shields, couplings, hose, mounting brackets, etc.

    * TRUST web info. 

GReddy Dyno Notes
  *(Scion FR-S with GReddy large diameter exhaust and GReddy Tuned-EcuTek - NOT INCLUDED)
  **dyno results may vary depending on conditions, additional components & tuning

*** Compatiable with GReddy Circuit Spec Oil Cooler Kit for FR-S
     ( p/n 12014632 )

In many states, it is unlawful to tamper with your vehicle’s emissions equipment. GReddy / GPP (GReddy Performance Products, Inc.) products are designed and sold for sanctioned off-road/competition, non-emissions controlled vehicles only and may never be used on a public road or highway. Using GReddy/GPP products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website: www.semasan.com/emissions for state by state details in the USA.) It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any GReddy/GPP product.
Legal for sale or use in CA only on vehicles which may never be driven on a public highway.

GReddy FR-S Product Page

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

No fuss way to convenently access a vaccuum / boost source on a FR-S / 86 / BRZ's FA20 engine (also compatiable with Forrester FA20 engine)

Ideally suited for force induction applications, where there is a need to access vaccuum / boost, i.e boost controller, boost gauge, etc...

GReddy FR-S Product Page

JDM SPEC ONLY

T620Z-10cm² turbo upgrade
   P850 actuator

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

JDM Spec Vehicle Only

TD06  turbo upgrade

JZX100 (1JZ-GTE)

TD06SH 25G-8cm² Ex. Manifold 42.7mm Type R11 - p/n 11510560
TD06SH 25G-10cm² Ex. Manifold 42.7mm Type R11 - p/n 11510544

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

JDM Spec Vehicle Only

T67  turbo upgrade

JZX100 (1JZ-GTE)

T67 25G-8cm² Ex. Manifold 42.7mm Type R11 - p/n 11510545
T67 25G-10cm² Ex. Manifold 42.7mm Type R11 - p/n 11510546

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

JDM Spec Vehicle Only

TD06  turbo upgrade

JZX90 (1JZ-GTE)

TD06S 20G-8cm² Ex. Manifold 42.7mm Type R08

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

JDM Spec Vehicle Only

TD06  turbo upgrade

JZZ30 (1JZ-GTE)

TD06S 20G-8cm² Ex. Manifold 42.7mm Type R08

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

for JZA80 Supra turbo (2JZ-GTE)

single T78 29D-14cm² turbo

sus manifold 42.7mm & type r w/g

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

for JZA80 Supra turbo (2JZ-GTE)

single T78 29D-17cm² turbo

sus manifold 42.7mm & type r w/g

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

for JZA80 Supra turbo (2JZ-GTE)

single T78 33D-15cm² turbo
sus manifold 42.5mm & type r w/g

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

for JZA80 Supra turbo (2JZ-GTE)

single T78 33D-17cm² turbo
sus manifold 42.5mm & type r w/g

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

for JZA80 Supra turbo (2JZ-GTE)

single T88 34D-22cm² turbo

sus manifold 42.7mm & type r w/g

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

for JZA80 Supra turbo (2JZ-GTE)

single T88H 34D-22cm² turbo

sus manifold & type C15 w/g - p/n11510039

(C11- p/n11510545, C14 - p/n11510526, C15 - p/n11510527)

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

for JZA80 Supra turbo (2JZ-GTE)

single T88H 34D-22cm² turbo
sus manifold 45mm & type C11 w/g - p/n11510533

(C11- p/n11510541, C14 - p/n11510542, C15 - p/n11540543)

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

T88H-38GK 18 or 22cm² upgrade turbo, flanges, hardware

Compatiable with most T78, T88 turbo upgrade kits

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

Make:  Nissan
Model: Skyline GT-R
Year: 1989-94

Chassis: BNR32
Engine: RB26DETT
Type:  Large single GReddy/MHI T78 or T88 SPL turbocharger upgrade with stainless-steel exhaust manifold, extenturnal type wastegate, down pipe, dual Airinx intake conversion and necessary hardware. 

Product Options:

11520038  BNR32     T78 33D 17cm², SUS Mani. 42.7mm, Type R1.1 w/g,  80mm dia Air Flow
11520063  BNR32     T78 33D 17cm², SUS Mani. 45mm, Type C0.8 w/g, 80mm dia Air Flow
11520624  BNR32     T78 33D 17cm², SUS Mani. 45mm, Type C1.1 w/g, 80mm dia Air Flow
11520625  BNR32     T78 33D 17cm², SUS Mani. 45mm, Type C1.4 w/g, 80mm dia Air Flow
11520626  BNR32     T78 33D 17cm², SUS Mani. 45mm, Type C Hi Flow w/g, 80mm dia Air Flow

11520039   BNR32     T88 SPL 33D 15cm², SUS Mani. 45mm, Type C0.8 w/g, 80mm dia Air Flow
11520558   BNR32     T88 SPL 33D 15cm², SUS Mani. 45mm, Type C1.1 w/g, 80mm dia Air Flow
11520559   BNR32     T88 SPL 33D 15cm², SUS Mani. 45mm, Type C1.4 w/g, 80mm dia Air Flow
11520559   BNR32     T88 SPL 33D 15cm2, SUS Mani. 45mm, Type C Hi Flow w/g, 80mm dia Air Flow

11520573   BNR32     T88 SPL 34D 22cm2, SUS Mani. 45mm, Type C0.8 w/g, 80mm dia Air Flow
11520574   BNR32     T88 SPL 34D 22cm2, SUS Mani. 45mm, Type C1.1 w/g, 80mm dia Air Flow
11520575   BNR32     T88 SPL 34D 22cm2, SUS Mani. 45mm, Type C1.4 w/g, 80mm dia Air Flow
11520576   BNR32     T88 SPL 34D 22cm2, SUS Mani. 45mm, Type C Hi Flow w/g, 80mm dia Air Flow

11520061   BCNR33     T78 33D 17cm2, SUS Mani. 42.7mm, Type R1.1 w/g, 80mm dia Air Flow
11520066   BCNR33     T78 33D 17cm2, SUS Mani. 45mm, Type C0.8 w/g, 80mm dia Air Flow
11520627   BCNR33     T78 33D 17cm2, SUS Mani. 45mm, Type C1.1 w/g, 80mm dia Air Flow
11520628   BCNR33     T78 33D 17cm2, SUS Mani. 45mm, Type C1.4 w/g, 80mm dia Air Flow
11520629   BCNR33     T78 33D 17cm2, SUS Mani. 45mm, Type C Hi Flow w/g, 80mm dia Air Flow

11520064   BCNR33     T88 SPL 33D 15cm2, SUS Mani. 45mm, Type C0.8 w/g, 80mm dia Air Flow
11520577   BCNR33     T88 SPL 33D 15cm2, SUS Mani. 45mm, Type C1.1 w/g, 80mm dia Air Flow
11520578   BCNR33     T88 SPL 33D 15cm2, SUS Mani. 45mm, Type C1.4 w/g, 80mm dia Air Flow
11520579   BCNR33     T88 SPL 33D 15cm2, SUS Mani. 45mm, Type C Hi Flow w/g, 80mm dia Air Flow

11520592   BCNR33     T88 SPL 34D 22cm2, SUS Mani. 45mm, Type C0.8 w/g, 80mm dia Air Flow
11520593   BCNR33     T88 SPL 34D 22cm2, SUS Mani. 45mm, Type C1.1 w/g, 80mm dia Air Flow
11520594   BCNR33     T88 SPL 34D 22cm2, SUS Mani. 45mm, Type C1.4 w/g, 80mm dia Air Flow
11520595   BCNR33     T88 SPL 34D 22cm2, SUS Mani. 45mm, Type C Hi Flow w/g, 80mm dia Air Flow

11520071   BNR34      T78 33D 17cm2, SUS Mani. 42.7mm, Type R1.1 w/g, 80mm dia Air Flow
11520072   BNR34      T78 33D 17cm2, SUS Mani. 45mm, Type C0.8 w/g, 80mm dia Air Flow
11520630   BNR34      T78 33D 17cm2, SUS Mani. 45mm, Type C1.1 w/g, 80mm dia Air Flow
11520631   BNR34      T78 33D 17cm2, SUS Mani. 45mm, Type C1.4 w/g, 80mm dia Air Flow
11520632   BNR34      T78 33D 17cm2, SUS Mani. 45mm, Type C Hi Flow w/g, 80mm dia Air Flow

11520073   BNR34     T88 SPL 33D 15cm2, SUS Mani. 45mm, Type C0.8 w/g, 80mm dia Air Flow
11520596   BNR34     T88 SPL 33D 15cm2, SUS Mani. 45mm, Type C1.1 w/g, 80mm dia Air Flow
11520597   BNR34     T88 SPL 33D 15cm2, SUS Mani. 45mm, Type C1.4 w/g, 80mm dia Air Flow
11520598   BNR34     T88 SPL 33D 15cm2, SUS Mani. 45mm, Type C Hi Flow w/g, 80mm dia Air Flow

11520611   BNR34     T88 SPL 34D 22cm2, SUS Mani. 45mm, Type C0.8 w/g, 80mm dia Air Flow
11520612   BNR34     T88 SPL 34D 22cm2, SUS Mani. 45mm, Type C1.1 w/g, 80mm dia Air Flow
11520613   BNR34     T88 SPL 34D 22cm2, SUS Mani. 45mm, Type C1.4 w/g, 80mm dia Air Flow
11520614   BNR34     T88 SPL 34D 22cm2, SUS Mani. 45mm, Type C Hi Flow w/g, 80mm dia Air Flow

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

TD06  Turbo upgrade, Type R w/g 0.8, sus 42.7mm ex mani., Airinx

TD06S 20G-8cm2 - p/n 11520003 / 11520004 - [DISCONTIUED]
TD06SH 25G-8cm2 - p/n 11520007 / 11520619
TD06SH 25G-10cm2 - p/n 11520615 / 11520620

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

T67 25G  Turbo upgrade, Type R w/g 0.8, sus 42.7mm ex mani., Airinx

T67 25G-8cm2 - p/n 11520616 / 11520008
T67 25G-10cm2 - p/n 1150617 / 11520618

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

upgrade TZ actuated turbo (P765 actuator)

bolt-on replacement

T517Z -8cm2, - p/n 11520013
T517Z -10cm2, - p/n 11520016

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

upgrade TZ actuated turbo (P765 actuator)

bolt-on replacement

T518Z -8cm2, - p/n 11520015
T518Z -10cm2, - p/n 11520017

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

TD06 Turbo upgrade,  Type R w/g 0.8, sus 42.7mm ex mani., Airinx

TD06S L2 20G -8cm2, TD06SH 25G, T67 25G kits available - CALL

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

TD06 Turbo upgrade,  Type R w/g 0.8, sus 42.7mm ex mani., Airinx

TD06SH 25G-8cm2 - p/n 11520012
TD06SH 25G-10cm2 - p/n 11520621

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

T67 Turbo upgrade,  Type R w/g 0.8, sus 42.7mm ex mani., Airinx

T67 25G-8cm2 - p/n 11520622 -SALE!
T67 25G-10cm2 - p/n 11520623

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

TD06SH 25G-8cm² turbo

sus manifold 45mm & type r11 w/g

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

T67 25G-8cm² turbo

sus manifold 45mm & type r11 w/g

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

single TD06SH 20G-16cm² turbo

sus manifold 50mm & type r08 w/g

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

single TD06SH 25G-16cm² turbo

sus manifold 50mm & type r08 w/g - p/n 11540031

sus manifold 50mm & type T09 w/g - p/n 11540035

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

DISCONTINUED Currently Out of Production

(AP1) S2000

T518Z-10cm2 trubo

Type 28 Intercooler

cast manifold

plug-in Ultimate, 550cc inj, fuel pump, oil reloc.

Airinx intake, oil filter relocation kit

for more details, please see our (Blog post)

* Check legality of aftermarket products with your local state, county, city authorities before purchasing.

DISCONTINUED Currently Out of Production

(AP2) S2000 (std throttle cable type)

T518Z-10cm2 trubo

Type 28 Intercooler

cast manifold

plug-in Ultimate, 550cc inj, fuel pump, oil reloc.

Airinx intake, oil filter relocation kit

DISCONTINUED Out of Production - see revised kit :  11550051 

(AP2) S2000 (drive by wire throttle type)

T518Z-10cm2 trubo

Type 28 Intercooler

cast manifold

plug-in Ultimate, 550cc inj, fuel pump, oil reloc.

Airinx intake, oil filter relocation kit

for more details, please see our (Blog post)

* Check legality of aftermarket products with your local state, county, city authorities before purchasing.

TD06 turbo upgrade
up pipe & type r08 w/g

TD06S L2 20G-8cm² - p/n 11560006
TD06SH 25G-8cm² - p/n 11560007
TD06SH 25G-10cm² - p/n 11560008

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

T67 25G turbo upgrade
up pipe & type R08 w/g

T67 25G-8cm2 - p/n 11560009
T67 25G-10cm2 - p/n 11560010

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

DISCONTINUED - Out of Production

TD05H-18G 8cm² turbo, actuator w/g

Type 31V intercooler

sus manifold, racing downpipe(fuel options available, sold separately)

DISCONTINUED - Out of Production

USA spec only

for (CPV35) VQ35DE, G35 Coupe 6MT only

twin TD05H-18G8cm2 turbos

cast manifold, ext w/g's, w/e-manage, & 440cc inj

cast oil pan, Airinx intakes

(intercooler p/n 12020153 recommended)

DISCONTINUED - Out of Production

USA spec only

twin TD05H-18G 8cm2 turbos

cast manifold, ext w/g , w/e-manage, & 440cc inj

cast oil pan, airinx intake system

(I/C p/n 12020203 recommended)

DISCONTINUED - Out of Production

USA Spec only

(Z33) VQ35DE

twin TD06SH-20G 8cm² turbos

Type 23 Intercooler

cast manifolds, racing downpipes, external wastegates, w/g dump pipes, cast oil pan, airinix intake

DISCONTINUED - Out of Production

USA spec only

(Z33) VQ35HR

twin TD06SH-20G 8cm² turbos

Type 29 Intercooler

cast manifolds, racing downpipes, external wastegates, w/g dump pipes, cast oil pan, airinix intake

DISCONTINUED - Out of Production

USA spec only

(Z34) VQ37HR

twin TD06SH-20G8cm² turbos

Type 29 Intercooler

cast manifolds, racing downpipes, external wastegates, w/g dump pipes, cast oil pan, airinix intake

for more details please see our Tumblr,  (blog post)  or our  Featured page

DISCONTINUED - Out of Production

T618Z 10cm2 turbo

Type 31 intercooler

cast manifold, e-manage ultimate w/plug-in harness

Airnix intake

**Designed for the USA spec. RX8, 6 speed manual transmission with ORIGINAL ECU Programming, any other reflashes may require retuning of the Ultimate by your local Tuner.

DISCONTINUED - Out of Production

USA spec only

(FG2) Civic Si 2dr. only

T517Z 8cm2 turbo (P565)

Type 31 Intercooler

cast manifold, plug-in ultimate, 370cc inj

*Also see our GReddy Tuner Turbo Kit with larger T518Z turbo and without fuel management  p/n11550047

DISCONTINUED - Out of Production

(FG2) Civic Si 2dr. only

T518Z 8cm2 turbo

Type 31 Intercooler

cast manifold

(does not include fuel management/injectors)

_{(*previously P/N 11550029)}

DISCONTINUED - Out of Production

(DC5) RSX (Type S)
T517Z-8cm2 turbo

cast mani., cast elbow adapter
Ultimate, 440cc inj
Airinx intake

(intercooler p/n 12050029 recommended)

DISCONTINUED - Out of Production

(DC) RSX (non-Type S)
T517Z-8cm2 turbo

cast mani., cast elbow adapter
Ultimate, 440cc inj
Airinx intake

(intercooler p/n 12050423 recommended)